DrayTek ANT-4GE1-K network antenna Omni-directional antenna N-type 6 dBi
- Omnidirectional Outdoor Aerial
- 4-6 dBi Signal Gain
- Can also be used Indoors
- Improves signal stability and reception
- Suitable for all DrayTek LTE routers
- Wall or Pole mountable (includes fittings)
- 4G, 3G, 2G & LTE Compatible (See band support)
- N-Plug Connector
- Requires N-to-SMA cable (sold separately)
Quick Overview
Gain (dBi) 4 - 6, VSWR 1.5, N-Female, 50ohm
Secured and trusted checkout with 
| Antenna gain level (max) | 6 dBi |
|---|---|
| SKU | ANT-4GE1-K |
| EAN | 0714735999231 |
| Manufacturer | Draytek |
| Availability | In Stock |
Outdoor 4G Antenna for DrayTek LTE Routers
4G/LTE routers such as the DrayTek Vigor 2862Lac can provide highly resilient connectivity by utilising mobile broadband, either as the main Internet connection or as a backup connection for the building.
The Outdoor 4G Antennas for DrayTek LTE Routers can improve 4G, 3G & LTE signal reception for any DrayTek Vigor LTE router, expanding coverage and improving speeds, by allowing you to locate the antenna in a location which receives a strong signal.
Installation of outdoor antennas enables or improves 4G/LTE connectivity into locations where it’s typically inaccessible. For instance, in a comms cabinet, or in parts of a building that otherwise cannot receive mobile signal, due to building layout or location. Simply placing the antennas physically outdoors normally provides a significant signal boost over what can be achieved within a building, potentially improving speeds through better access to LTE bands and nearby mobile cell towers. The antennae can also be installed inside a building, perhaps just run outside the location/room which has poor coverage.
The Outdoor 4G Antennas for DrayTek LTE Routers support all currently used 4G, 3G and 2G frequency bands from 700MHz to 2.7GHz.
The antennas are Omni-Directional, designed for vertical orientation to receive signal from any nearby mobile cell tower, without requiring careful or sensitive aiming during installation.
Install a pair of Outdoor 4G Antennas around 0.5m to 1m apart to enable the MIMO (Multiple In, Multiple Out) capability of 4G & LTE wireless networks, further improving speeds and connection resilience. For best results, separate the antennas horizontally in built-up areas and vertically in open areas.
The Outdoor 4G Antennas for DrayTek LTE Routers are weatherproof and ideal for permanent outdoor installation either on a pole or wall. Fixings are provided suitable for either (poles not included).
The N-type connector on each antenna provides a secure and weather resistant antenna connection, which links to the router’s SMA antenna connectors with a suitable cable. Each Outdoor 4G Antenna requires an N-plug to SMA cable for installation, such as our own 5 metre cable (model: CAB-LTEA5, supplied separately). You can use your own shorter or longer cables instead, ensuring the right connectors and always keep cable lengths to a minimum to avoid unncessary signal loss.
4G/LTE routers such as the DrayTek Vigor 2862Lac can provide highly resilient connectivity by utilising mobile broadband, either as the main Internet connection or as a backup connection for the building.
The Outdoor 4G Antennas for DrayTek LTE Routers can improve 4G, 3G & LTE signal reception for any DrayTek Vigor LTE router, expanding coverage and improving speeds, by allowing you to locate the antenna in a location which receives a strong signal.
Installation of outdoor antennas enables or improves 4G/LTE connectivity into locations where it’s typically inaccessible. For instance, in a comms cabinet, or in parts of a building that otherwise cannot receive mobile signal, due to building layout or location. Simply placing the antennas physically outdoors normally provides a significant signal boost over what can be achieved within a building, potentially improving speeds through better access to LTE bands and nearby mobile cell towers. The antennae can also be installed inside a building, perhaps just run outside the location/room which has poor coverage.
The Outdoor 4G Antennas for DrayTek LTE Routers support all currently used 4G, 3G and 2G frequency bands from 700MHz to 2.7GHz.
The antennas are Omni-Directional, designed for vertical orientation to receive signal from any nearby mobile cell tower, without requiring careful or sensitive aiming during installation.
Install a pair of Outdoor 4G Antennas around 0.5m to 1m apart to enable the MIMO (Multiple In, Multiple Out) capability of 4G & LTE wireless networks, further improving speeds and connection resilience. For best results, separate the antennas horizontally in built-up areas and vertically in open areas.
The Outdoor 4G Antennas for DrayTek LTE Routers are weatherproof and ideal for permanent outdoor installation either on a pole or wall. Fixings are provided suitable for either (poles not included).
The N-type connector on each antenna provides a secure and weather resistant antenna connection, which links to the router’s SMA antenna connectors with a suitable cable. Each Outdoor 4G Antenna requires an N-plug to SMA cable for installation, such as our own 5 metre cable (model: CAB-LTEA5, supplied separately). You can use your own shorter or longer cables instead, ensuring the right connectors and always keep cable lengths to a minimum to avoid unncessary signal loss.
| Performance | |
|---|---|
| Bandwidth note | 800, 1800, 2600, 900, 2100, 700, 3400 MHz |
| Antenna gain level (max) | 6 dBi |
| Frequency band | 0 GHz |
| Vertical beam width | 25° |
| Impedance | 50 Ω |
| Horizontal beam width | 360° |
| Gain | 4 / 6 dBi |
| Features | |
| Housing material | Acrylonitrile butadiene styrene (ABS), Zinc |
| Connector gender | Female |
| Antenna type | Omni-directional antenna |
| Voltage Standing Wave Ratio (VSWR) | 1.5 |
| Polarization | Vertical polarization |
| Product colour | Stainless steel, White |
| Antenna connector type | N-type |
| Antenna gain level (max) | 6 dBi |
| Frequency band | 0 GHz |
| Vertical beam width | 25° |
| Impedance | 50 Ω |
| Horizontal beam width | 360° |
| Gain | 4 / 6 dBi |
| Operational conditions | |
| Operating temperature (T-T) | -40 - 80 °C |
| Weight & dimensions | |
| Weight | 500 g |
| Height | 32 mm |
| Diameter | 7 mm |
| Technical details | |
|---|---|
| Antenna gain level (max) | 6 dBi |
| Frequency band | 0 GHz |
| Antenna type | Omni-directional antenna |
| Voltage Standing Wave Ratio (VSWR) | 1.5 |
| Vertical beam width | 25° |
| Polarization | Vertical polarization |
| Impedance | 50 Ω |
| Horizontal beam width | 360° |
| Gain | 4 / 6 dBi |
| Antenna connector type | N-type |
| Harmonized System (HS) code | 85177100 |
| Colour | |
| Product colour | Stainless steel, White |
| Packaging content | |
| Quantity per pack | 1 pc(s) |
| Logistics data | |
| Quantity per pack | 1 pc(s) |
| Harmonized System (HS) code | 85177100 |
Write Your Own Review
Tell us what you are looking for, and let us help to source it.
At Flux IT Hardware, we specialise in network and server equipment. As an independent reseller, we have access to a wider market of resellers, distributors and manufacturers. Supplying both new and refurbished hardware, we can meet any budget and lead time. We have thousands of products to choose from and an unrivalled network of vetted UK and European suppliers. We find the best prices and pass the savings on to you. All backed up with a choice of warranties to give you complete peace of mind when purchasing.
Whether you’re upgrading infrastructure, expanding capacity, or enhancing security, our experts will guide you to the right solution, based on performance, storage, and connectivity needs.
Our portfolio includes:
- Business laptops and desktops
- Enterprise servers
- Switches, routers, and firewalls
- Wireless and edge infrastructure
We found other products you might like!
Please complete your information below to login.
Sign In
Create New Account